Top 10 Best Fishing Scissors

This is one of the most commonly asked questions, as a bad cut can cause the fishing line to fray. Also, a bad cut means the fishing line will have drag and friction when cast into the water. To ensure you cut a braided line correctly, follow these steps.
Hold the fishing line firmly between your thumb and index finger
Depending on the kind of scissors you are using, you may have to pull the line tight and do away with any slack
Remove your scissors, and with a smooth cutting motion, cut the line. Ensure that you hold the scissors straight and not at an angle.
Use a lighter to burn the cut end of the line gently. It will melt to the end if it is frayed. Use your thumb and forefinger to stick the frayed ends together.
Using these steps, you can cut your braided fishing line easily and then thread it comfortably through the eye of the hook.

Once you find the best fishing scissors, you will buy them. However, you still need to take care of it to last a long time. After your fishing trip, ensure you rinse the scissors thoroughly with fresh water. It will eliminate dirt, salt, and other contaminants sticking to the blade.
After washing, thoroughly dry the blades and handle with a clean rag. Now you can store the scissors in a cool and dry place until you want to use it the next time. Oil the hinges and other moving parts to ensure the scissors work without getting caught or jammed.
Spray anti-rust on the blades even if they are made from stainless steel. This will prevent them from rusting as, over time, even stainless steel tends to rust.

Fishing scissors can cost anywhere from $5 to $35 or more. So, how much you are willing to spend will depend on the features and your budget. If you are on a tight budget, a $5 pair of scissors will suffice. On the other hand, if you have a bigger budget, opt for a more expensive one.
Remember that being more expensive does not necessarily mean good performance and durability. So, it is best first to read user reviews and do research online before you decide to go ahead with the purchase.

Yes, you can use fishing scissors made for saltwater in freshwater. These scissors are made using materials that do not corrode or degrade with saltwater exposure. So, they should work well in freshwater.
Remember that after using saltwater or freshwater, you should rinse the scissors thoroughly and lubricate them to keep them functioning optimally.

This question is more common than you think, even though it can be resolved with a little common sense. You and your gear and accessories will get wet when you go fishing. It is necessary to wash and completely dry the scissors after your trip. Wet scissors and exposure to saltwater are the main reasons for corrosion.
Most people believe that if a manufacturer says the fishing scissors are corrosion-resistant, they do not need maintenance. On the contrary, washing the scissors with freshwater, drying it thoroughly, and then lubricating them will prevent corrosion and rust, even if it is stainless steel or any other corrosion-resistant metal.

Usually, you can use a knife sharpening tool or a tool specially designed for scissors to sharpen the blade. It is best to check with the manufacturer, as some blades need to be sharpened professionally.
If you are sharpening the blades, use a smooth motion while sharpening. A sharpener designed for scissors allows you to sharpen both blades relatively easily.
If you use a sharpening stone, wet it with plain water or honing oil. Open the scissors and lay the inside surface of the scissors on the stone, and push downwards gently. Now, move the blade across its entire length on the stone, from the tip to the base. If you do it right, you should get each blade sharpened after 10 to 20 strokes.
On the other hand, if the blade is mildly dull, you can use aluminum foil. Take about 12 inches of aluminum foil and fold it into about six layers. Now cut this folded foil about 10 to 12 times, creating strips. The mildly dull blades will get sharp.

This is a difficult question to answer as it depends on what features you want in the scissors. When selecting fishing scissors, consider their resistance to corrosion, the types of lines it can cut, grip comfort, and the materials it is made from. This will enable you to choose the best fishing scissors.
Alternatively, you can select any one from this list of the top 10 best fishing scissors to ensure you get nothing but the best.

While it is possible to use regular scissors to cut lines and do other tasks, it is not recommended. Regular scissors are not designed to cut lines, gut fish, or fins. The cut end will end up fraying, and you will be unable to cut braided and FireLine fishing lines with a regular pair. Also, they will not be able to take constant water exposure, which will cause them to corrode.
Fishing scissors are meant for cutting lines and can do this easily without causing the lines to fray. Fishing scissors are designed to be resilient, durable, and long-lasting and do all the tasks you want without a hassle.

Going online is the best choice if you want reliability, convenience, and fast purchase. You will not spend time and money driving to a store and can sit in the comfort of your home and check the different fishing scissors we have listed here to make an informed buying decision.

While the choice is yours, we have observed that the tether tends to wear off with constant use, resulting in breakage. Then it will become inconvenient for you to carry and use your fishing scissors. It is best to opt for fishing scissors that you can secure to your belt or carry around your neck with the help of a lanyard. If these solutions do not suit you, look for compact and lightweight fishing scissors that you can carry in your tackle box.